ABOUT WICKER AND RATTAN
COMPANY & LOCATION
WICKER and RATTAN
The Basic Material
The use of wicker and rattan in home furnishings is not new. It dates back to the 1950's in Asia and the Philippines where rattan was used to craft many household articles. Canadian's love affair with wicker and rattan began back in the 1920's when practically everyone longed for a porch full of white wicker furniture. In the '50's and '60's much of the wicker and rattan on the market was cheaply made and was strictly a type of furniture used in the patio. Today, innovative, well-made designs and combinations of wood, metal and leather with the rattan make an attractive option in livings rooms, dining rooms, bedrooms and family rooms. Wicker and rattan are definitely back for an encore as consumers again delight in their casual and comfortable appeal.
Rattan is a vine that grows in the mountain regions of Southeast Asia and the Philippines where rainfall averages 80 inches annually. It grows in tangles, horizontally, like ivy, but is a solid timber, not hollow like bamboo. Rattan is pliable and easily bent and carved (with the aid of steam ovens) to form many shapes and frames, although highly flexible, it is one of the strongest timbers available. Although rattan is as strong as a wood for furniture making, it is much lighter in weight and will withstand tough, daily usage.
All Wicker is Rattan
Although many consumers use the terms "wicker" and "rattan" interchangeably, they are not the same thing. Wicker, which means woven, is a by-product of rattan; hence all wicker is rattan, but not all rattan is wicker. Wicker is a term for the smaller stems from the rattan plant.
Harvesting the rattan takes place when the vine is 6 to 15 years old. At this point, stems can be as long as 600 feet and a growth path through every part of the jungle. Harvesting is done completely by hand since the jungle terrain will not permit use of vehicles or other machinery. As the vines are removed, they are cut into 18 and 20 foot lengths; the stems are stripped of thorns then washed and dried in the open sunlight. Next the stems are tied into bundles and usually 50 poles are carried on the backs of the workers sometimes several miles to the furniture factories.
When the poles arrive at the furniture factory, typically just an open-sided hut, they are fumigated to remove insects (in Indonesia the poles are "deep-fried" in coconut oil which drives away all insects, as well as moisture) and then stood on end in teepee style to dry. The cured poles are then sorted into uniform size and sand graded according to quality and color. Next, the tough outer skin is carefully peeled away. This skin becomes peel cane which is used to bind the joints of the furniture frame. Peel cane, an extremely tough material, is also woven to make cane seats and backs in addition to other uses. Next, the stripped poles are sanded and cut into appropriate lengths needed for frame parts.
There are two ways the poles are bent to produce the frame:
Steam ovens and molds: poles are steamed in a drum which makes them temporarily flexible enough to form into a furniture part. When cool, the poles retain the shape. The advantage is that it is accurate and economical for huge quantities of poles. The disadvantage is that it requires much team work.
Blow torch: poles are heated with a blow torch to make them pliable. The advantage is that this skill can be done by an individual worker, but it is not as accurate as the oven method.
Either of these methods are used in combination with a handmade jig around which other poles are shaped. This jig, a sort of mold that is handmade and crude in appearance is actually two precise measurements. Using either steam oven or blow torch to make the poles pliable, the worker molds the pole to the jig. The formed parts are then joined to make a piece of furniture using screws and glue.
The next step, weaving or binding, is usually done by hand by one person who takes the piece of furniture from frame to furnish. However, sometimes two or three people specialize in one step of the process.
Natural finish: this is a clear lacquer used on rattan that still has its bark. For a more refined finish, the lacquer is applied to rattan that has been scraped.
Stained finish: like wood furniture, rattan is most often given finish using stain. With some pieces, the stain is applied after framing and assembly, but with some sophisticated pieces, each component is individually stained and then assembled.
Three types of stain are used:
No matter which finish is used, most quality rattan gets one hand sanding (and maybe one machine) sandwiched between at least two coats of clear lacquer. Nail holes are puttied on all finishes and the piece is given a final rubbing with steel wool followed by wax polishing for a smooth finish.
- Water base stain: because it is the most economical but not conclusively refined finish, this stain is used more for wicker.
- Oil based stain: superior to water based stain, but will cause tearing if applied to rattan poles unevenly.
Alcohol based stain: the most superior stain for rattan. The characteristics of the stain allow the grain of the poles to show through.
- Painted finish: white is a favourite colour for rattan, although many pieces are now showing up in pastels and even black.
Care of Wicker and Rattan
Wicker and Rattan are two of the most maintenance free furniture materials you'll find. To keep it looking its best and to protect the finish, wipe occasionally with a damp cloth. You can also use a soft brush or brush attachment of a vacuum cleaner to clean dust that can accumulate.
Because wicker and rattan furniture have a history of inconsistencies in quality, a store owner as well as his consumer must be able to tell quality workmanship from shoddy workmanship.
- The finish on the piece should be smooth and consistent without streaks and bubbles. Because of the different absorption of rattan poles, colour may be slightly different from pole to pole. This is not an imperfection, but part of the beauty of rattan.
- Run your hand over the frame to check for rough edges that may snag clothes and pantyhose. Of course, the finish cannot be as sleek as the finish on a piece of wood furniture, but should be relatively smooth.
- Joints should be secure and nailed or screwed into place. Look for joints wrapped with peel core or stripes of leather.
SEND THIS PAGE TO A FRIEND
* prices subject to change without notice | availability subject to demand | we are not responsible for pricing errors.
WICKER WORLD: 120 McPhillips Street, Winnipeg, MB Canada, R3E 2J7
(204) 779-2900 (Outside Winnipeg, call: 1-888-856-9003), Fax: (204) 779-4000